Utility Cuts

Utility Cuts


A Better Way: Cost benefits of using EZ Street Asphalt

Cost benefits of using EZ Street Asphalt.


North Vancouver, British Columbia

EZ Street Asphalt replaces traditional cold mix as a permanent solution to repair utility cuts.




Utility Cuts, Overlays & Edge Repairs

EZ Street Cold Asphalt permanent overlays, utility cut and driveway repairs in Canada


There’s a better way for utility cut and trench reinstatements. EZ Street cold asphalt can be utilized as a permanent trench patching, overlay, or edge repair material if proper installation procedures are followed. As with any material, optimum placement of a well compacted, solid, unyielding base is imperative under the EZ Street material in order to avoid trench failure that can result from settling, rutting, or shoving. EZ Street cold asphalt can be expected to consolidate up to 40% before maximum density is achieved. Install in 25 mm lifts.



Manholes, Water Valves & Drains


EZ Street cold asphalt can serve as a permanent material around manhole covers, water valves, drains, and catch basin grates if installed properly. Achieving adequate compaction should be the primary focus as the hardware can cause significant compaction obstacles and may tend to shift under traffic. It is recommended that the EZ Street material be left slightly higher than the surrounding hard surface in order to accommodate secondary compaction as a result of traffic flow.

EZ Street Cold Asphalt for manholes and drains